占位图(1733997262290).jpg
+
  • 占位图(1733997262290).jpg

Water-based polyurethane two-component topcoat

Classification:

Water-Based Paint


Low VOCs content, two-component polyurethane water-based paint.
Get A Quote

【Overview】Low VOCs content, two-component polyurethane water-based paint.

【Characteristics】High gloss, high hardness, excellent decorative effect, good weather resistance, and excellent chemical resistance. Can be paired with water-based primer or solvent-based primer, with a wide range of applications.

【Composition】Water-based hydroxyl acrylate emulsion resin, modified isocyanate, pigments, additives, deionized water.

【Application】Field of application: Suitable for various high decorative topcoats on metal surfaces such as steel, cast iron, and aluminum. For example: passenger cars, construction machinery, agricultural machinery, vehicles, bus exteriors, wind turbine towers, etc.

 

【Original Paint Performance】

Serial Number

Item

Index

Test Method

1.1

Original Paint State

No foreign matter or hard sediment

Visual Inspection

1.2

Fineness μm, ≤

10

GB/T1724-2007

1.3

Solid Content %, ≥

45

GB/T1725-2007

1.4

(Shelf Life) Months

(6)

GB6753.3-1986

 

[Construction Performance]

Serial Number

Item

Index

82

Dilution %

5-10

2.2

Sag limit μm, ≥

50

2.3

diluent

Deionized water

2.4

Typical dry film thickness

30-40μm

2.5

Coating method

Airless spraying, air spraying, brushing, roller coating

2.6

Spraying environment

Temperature: 25±2°C, Humidity: 65±5%RH

2.7

Curing conditions

Naturally dried, 80°C×30min baking curing

2.8

Natural curing time

≤10℃:≈48h; 10-20℃:≈24h; 20-35℃:≈18h; ≥35℃:≈12h

 

【Paint film performance】

Serial Number

Item

Index

Test Method

3.1

Paint film appearance

In line with the standard plate, smooth and particle-free

Visual Inspection

3.2

Gloss 60°≥

85

GB/9754-2007

3.3

Pencil hardness (abrasion), ≥

H

GB/T1728-1989

3.4

Impact-resistant Kg ·cm, ≥

50

GB/T1732-1993

3.5

Flexibility mm, ≤

1

GB/T1731-1993

3.6

Adhesion, grade, ≤

1

GB/T1720-1989

3.7

耐酸(50g/L H2SO4)240h

Non-foaming, allowing for slight discoloration

GB/T1733-1993

3.8

耐碱(50g/L NaOH)120h

Non-foaming, allowing for slight discoloration

GB/T17331993

3.9

耐水性(40℃×240h)

No discoloration, no blistering, no shedding

GB/T1733-1993

3.10

Artificially accelerated aging, 1000h

Non-blistering, non-shedding, allowing for slight discoloration and loss of light

GB/T1865-2009

3.11

VOCs(g/L),≤

250

GB/T23985-2009

 

【Construction Instructions】

This product is a two-component coating and is filled in two barrels. When used, it should be mixed according to the prescribed proportion. Once blended, it must be used within the specified use-by time.

(1) After opening the barrel, component A needs to be stirred evenly first, and it is recommended to use a power stirrer to stir.

(2) Mix the curing agent (component B) and the main paint (component A) in the specified proportion, and stir evenly with a mixer.

Varnish-solid ratio: 4:1 (mass ratio)
Dilution ratio: 5-20% (clean water)

Activation after paint adjustment:

5℃

10℃

15℃

20℃

25℃

30℃

35℃

4h

4h

3.5h

3.5h

3 hours

2.5h

2 hours

[Compatibility] Various types of anti-corrosion primers, electrophoretic primers, etc.

Coating methods: airless spraying, air spraying, brushing, rolling. It is recommended to use airless spraying or air spraying (with pressure tank). The thickness of a single spray should not be too thick, with a wet film thickness not exceeding 120μm. The interval for recoating can proceed once the previous coat is dry to the touch.
Cleaner: Alkaline clean water
Environmental requirements: Minimum construction temperature: 5℃;
Maximum construction humidity: 80% R.H.
Precautions: Do not let the paint remain in the paint tube, spray gun or spraying equipment.
Cleaning: Thoroughly rinse all equipment with cleaner.

 

Key words:

Water-Based Paint

Related Products


Water-based high-temperature primer paint (requires topcoat)

Low VOCs content, single-component high-temperature amino water-based paint.

Water-based high-temperature topcoat

Low VOCs content, single-component high-temperature amino water-based paint.

Epoxy iron oxide thick paint

Coatings made primarily from epoxy resin and polyamide resin as film-forming substances.

Epoxy zinc-rich primer

Coatings made with epoxy resin and polyamide resin as the main film-forming substances.

Various colors of acrylic amino baking paint

Coatings made with acrylic resin and amino resin as the main film-forming substances.

Get A Quote

We always uphold the business philosophy of win-win cooperation, look forward to working with you hand in hand, mutual benefit and win-win, create brilliant!

Submit

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.

Get A Quote

We always uphold the business philosophy of win-win cooperation, look forward to working with you hand in hand, mutual benefit and win-win, create brilliant!

Submit

* Note: Please be sure to fill in the information accurately and keep the communication unblocked. We will get in touch with you as soon as possible.